Serving the design and engineering community for over 23 years. 3D-CAM, Inc. is AS9100 REV C and ISO 9000:2008 certified by BSI Management Systems America, Inc.

(818) 773-8777

RD 75 FR


RFD 75 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact
resistant casting. RFD 75 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. The
one to one volume mix ratio makes the system readily adaptable for machine mixing and dispensing. RFD 75 is recommended i
n applications where a “thermoplastic feel” is desired.


Hardness, ASTM D-2240 75±2
Specific Gravity (gm/cc), ASTM D-792 cured 1.05
Displacement ( 26.4
Tensile Strength (psi) ASTM D-638 5,850
Tensile Modulus, (psi) ASTM D-638 0.2X106
Elongation(%) ASTM D-638 4.1
Flexural Strength (psi) ASTM D-790 7,567
Flexural Modulus ASTM D-790 0.2X106
Linear Shrinkage (in./in.) (3/8-1/2in ) ASTM-D-2566 0.0087
Coefficient of Thermal Expansion (in/in/0F)
ASTM D-696
Heat Deflection Temperature ASTM D-790 1350F(570C)
Izod Impact (ft.lbs./in.) ASTM D-256 0.42


Mixed Viscosity @ 770F(250C) (cps) 240
Color Creamy white
Work Life @ 770F(250C), 100 gr.mass 2-2.5 minutes
Demold Time 770F(250C) 20-60 minutes
Cure Schedule 5-7 days@ ambient temperature