|
|
|
3D-Cam, Inc.
9801 Variel Ave.
Chatsworth, CA 91311
Tel: 818.773.8777
Fax: 818.773.9582
|
|
 |
| |
|
|
PHYSICAL PROPERTIES
| Density |
0.0325-0.0448 lb/in3 |
| Water Absorption |
0.01-0.1 % |
| Moisture Absorption at Equilibrium |
0.1 % |
| Moisture Vapor Transmission |
23.9 cc-mil/100 in²-24hr-atm |
| Oxygen Transmission |
241 cc-mil/100 in²-24hr-atm |
| Environmental Stress Crack Resistance |
1000 hour |
| Linear Mold Shrinkage |
Min. 0.006 in/in |
| Melt Flow |
0.5-136 g/10 min |
MECHANICAL PROPERTIES
| Hardness, Rockwell R |
70-113 |
| Hardness, Shore D |
68-83 |
| Tensile Strength, Ultimate |
2860-11600 psi |
| Tensile Strength, Yield |
1740-6240 psi |
| Elongation @ break |
3-887 % |
| Elongation @ Yield |
3.5-110 % |
| Tensile Modulus |
72.5-1100 ksi |
| Flexural Modulus |
79.8-350 ksi |
| Flexural Yield Strength |
3450-7250 psi |
| Compressive Yield Strength |
6820-7250 psi |
| Izod Impact, Notched |
0.3-NB |
| Izod Impact, Unnotched |
12-31.1 ft-lb/in |
| Izod Impact, Unnotched Low Temp |
4.96-40.1 ft-lb/in |
| Izod Impact, Notched Low Temp |
0.506-2 ft-lb/in |
| Charpy Impact, Unnotched |
6.66-NB |
| Charpy Impact, Notched Low Temp |
0.619-80.9 ft-lb/in2 |
| Charpy Impact, Unnotched Low Temp |
3.81-109 ft-lb/in2 |
| Charpy Impact |
0.952-45.2 ft-lb/in2 |
| Gardner Impact |
0.885-21.8 ft-lb |
| Low Temperature Gardner Impact |
8.11-35.4 ft-lb |
| Tensile Creep Modulus, 1 hour |
79800-102000 psi |
| Tensile Creep Modulus, 1000 hours |
31900-63800 psi |
ELECTRICAL PROPERTIES
| Electrical Resistivity |
1E+14-1E+17 ohm-cm |
| Dielectric Constant |
2.2-2.3 |
| Dielectric Constant, Low Frequency |
2.3 |
| Dielectric Strength |
559-3560 kV/in |
| Dissipation Factor |
0.0002-0.002 |
| Dissipatin Factor, Low Frequency |
0.00007–0.00081 |
| Surface Resistance |
1E+10-1E+14 ohm |
| Arc Resistance |
136 sec |
| Comparative Tracking Index |
600 V |
THERMAL PROPERTIES
| CTE, linear 200 C |
13.9-103 µ in/in-°F |
| Heat Capacity |
0.478 BTU/lb-°F |
| Thermal Conductivity |
0.694-0.902 BTU-in/hr-ft²-°F |
| Melting Point |
266-334°F |
| Maximum Service Temperature, Air |
111-298°F |
| Deflection Temperature at 0.46 MPa |
55.4-460°F |
| Deflection Temperature at 1.8 MPa |
98.6-298°F |
| Vicat Softening Point |
95-298°F |
| UL RTI, Electrical |
149°F |
| UL RTI, Mechanical with Impact |
149°F |
| UL RTI, Mechanical without Impact |
149°F |
| Flammability, UL94 |
HB |
OPTICAL PROPERTIES
PROCESSING PROPERTIES
| Processing Temperature |
396-486°F |
| Rear Barrel Temperature |
428°F |
| Middle Barrel Temperatue |
428°F |
| Front Barrel Temperature |
428°F |
| Nozzle Temperature |
428°F |
| Mold Temperature |
95-120°F |
| Drying Temperature |
180°F |
|
