3d cam
An ISO 9001/AS 9100 Certified Company
3d cam

3D-Cam, Inc.
9801 Variel Ave.
Chatsworth, CA 91311

Tel: 818.773.8777
Fax: 818.773.9582

 

PHYSICAL PROPERTIES

Density 0.0415-0.043 lb/in3
Water Absorption .3-2 %
Moisture Absorption at Equilibrium 0.3-0.33 %
Linear Mold Shrinkage 0.003-0.0065 in/in
Melt Flow 0.9-27 g/10 min

MECHANICAL PROPERTIES

Hardness, Rockwell M 63-97
Tensile Strength, Ultimate 6820-11500 psi
Tensile Strength, Yield 7980-12300 psi
Elongation @ break 1-30 %
Elongation @ Yield 4-5 %
Tensile Modulus 319-551 ksi
Flexural Modulus 435-508 ksi
Flexural Yield Strength 11700-20000 psi
Compressive Yield Strength 14500-17000 psi
Shear Modulus 203 ksi
Izod Impact, Notched 0.225- 0.375 ft-lb/in
Izod Impact, Unnotched 5.06 ft-lb/in
Charpy Impact, Unnotched 9.04-28.6 ft-lb/in2
Charpy Impact, Notched 0.952-1.9 ft-lb/in²
Gardner Impact 0.17-1.03 ft-lb
Tensile Creep Modulus, 1 hour 261000-392000 psi
Tensile Creep Modulus, 1000 hours 174000-261000 psi

ELECTRICAL PROPERTIES

Electrical Resistivity 1E+14-1E+15 ohm-cm
Dielectric Constant 2.8-4
Dielectric Constant, Low Frequency 3-4
Dielectric Strength 450-1520 kV/in
Dissipation Factor 0.03-0.55
Dissipatin Factor, Low Frequency 0.05-0.55
Surface Resistance 1E+14-1E+16 ohm
Comparative Tracking Index 600 V

THERMAL PROPERTIES

CTE, linear 200 C 33.3-72.2 µ in/in-°F
Heat Capacity 0.349-0.351 BTU/lb-°F
Thermal Conductivity 1.32-1.67 BTU-in/hr-ft²-°F
Melting Point 266°F
Maximum Service Temperature, Air 106-217°F
Deflection Temperature at 0.46 MPa 176-217°F
Deflection Temperature at 1.8 MPa 106-212°F
Vicat Softening Point 117-243°F
Glass Temperature 212-221°F
Flammability, UL94 HB
Oxygen Index 18%

OPTICAL PROPERTIES

Refractive Index 1.49-1.498
Haze 1-96%
Transmission, Visible 80-93%

PROCESSING PROPERTIES

Processing Temperature 469-482°F

Home | Services | Support | Tech Data | Customers | Blog | Upload/Quotes | About Us | Contact Us
Copyright © 2012 3D-CAM, Inc. All Rights Reserved.