Serving the design and engineering community for over 23 years. 3D-CAM, Inc. is AS9100 REV C and ISO 9000:2008 certified by BSI Management Systems America, Inc.

(818) 773-8777

3D-CAM PC/ABS

PHYSICAL PROPERTIES

Typical Properties Typical Value Standard
Specific Gravity 1.12 ASTM D 792
Water Absorption, 24 hours @ 730F 0.1 % ASTM D 570
Water Absorption, Equilibrium, 730F 0.4 % ASTM D 570
Mold Shrinkage, flow, 0.125″ 0.5-0.7 % 3D-CAM Method
Mold Shrinkage, xflow, 0.125″ 0.5-0.7 % 3D-CAM Method
Melt Flow Rate, 2300C/3.8 Kgf 7 g/10 min ASTM D 1238
Melt Flow Rate, 2600C/5.0 Kgf 24 g/10 min ASTM D 1238

MECHANICAL PROPERTIES

Typical Properties Typical Value Standard
Tensile Stress, Yield, Type l, 2.0 in/min 8400 psi ASTM D 638
Tensile Strain, Yield, Type l, 2.0 in/min 5 % ASTM D 638
Tensile Strain, brk, Type l, 2.0 in/min 80 % ASTM D 638
Tensile Modulus, 2.0 in/min 360000 psi ASTM D 638
Flexural Modulus, 0.05 in/min, 2 in span 360000 psi ASTM D 790
Flexural Stress, yld, 0.05 in/min, 2 in span 13200 psi ASTM D 790
Izod Impact, Notched, 730F 10 ft-lb/in ASTM D 256
Izod Impact, notched, -220F 2 ft-lb/in ASTM D 256
Instrumented Impact Total Energy, 730F 480 in-lb ASTM D 3763
Instrumented Impact Total Energy, -220F 360 in-lb ASTM D 3763

THERMAL PROPERTIES

Typical Properties Typical Value Standard
HDT, 66 psi, 0.125″, unannealed 240°F ASTM D 648
HDT, 264 psi, 0.125″, unannealed 210°F ASTM D 648
CTE, flow, -40°F to 100°F 4.E-05/°F ASTM E 831
Thermal Conductivity 0.2 W/m-°C ASTM C 177